Marantz SR6008 - Manual (Page 147)

147
Appendix Tips Playback Connections Contents
Front panel Display Rear panel Index Remote
Settings
2 Center Width
Distributes the dialogue output from the center channel to left and right
channels and widens the sound image in the front.
0 – 7 (Default : 3)
%
• You can set this when the sound mode is Dolby PLg/gx in the “Music” mode.
• The smaller the value, the more dialogue is concentrated on the center
channel. The larger the value, the more dialogue is distributed to front left and
right channels, and the more the sound image widens in the front.
2 Height Gain
Control the front height channel volume.
Low : Reduce the front height channel volume.
Normal (Default) : Front height channel sound is output with standard
sound volume.
High : Increase the front height channel volume.
%
• You can set this in the “PLgz” sound mode or when using the PLgz decoder.
2 Speaker Select
Makes setting for the speakers outputting sound.
Surround Back : Sound is output from the surround back speakers.
Height : Sound is output from the front height speakers.
Wide : Sound is output from the front wide speakers.
%
• This can be set when “Assign Mode” is set to “Main Only”.
• You can set this when the sound mode is “MULTI CH STEREO” or “NEO:X”.
2 Set Defaults
The “Surround Parameter” settings are returned to the default settings.