2 hdmi pass through, 2 hdmi control, 2 pass through source – Marantz SR6008 User Manual
Page 156: 2 power off control
156
2 HDMI Pass Through
Selects how the AV receiver will pass HDMI signals to the HDMI
output in standby power mode.
On (Default) :
Passes the selected HDMI input through the AV
receiver’s HDMI output when the AV receiver is in
standby power mode.
Off : No HDMI signals are passed through the AV receiver’s HDMI
output in standby power mode.
2 HDMI Control
You can link operations with devices connected to HDMI and
compatible with HDMI Control.
On : Use HDMI control function.
Off (Default) : Do not use HDMI control function.
%
• Please consult the operating instructions for each connected device to check
the settings.
• Refer to “HDMI control function” (vpage 121) for more information about
the HDMI control function.
NOTE
• If the “HDMI Control” settings have been changed, always reset the power
to connected devices after the change.
2 Pass Through Source
The AV receiver will “pass through” the sources HDMI signal when
in standby.
Last : Choose this option to “pass through” the last used HDMI input
video source.
CBL/SAT (Default) / DVD / Blu-ray / GAME / AUX1 / AUX2 / MEDIA
PLAYER / CD
z
: Choose one of these HDMI sources to be passed
through when the AV receiver is in standby.
z “Pass Through Source” can be set when any of the HDMI connectors is
assigned to “CD” for the input source in the “Input Assign” (vpage 160)
setting.
%
• “Pass Through Source” can be set when “HDMI Control” is set to “On” or
“HDMI Pass Through” is set to “On”.
2 Power Off Control
Links the power standby of this unit to external devices.
All (Default) : If power to a connected TV is turned off independently
of the input source, power to this unit is automatically
set to standby.
Video : With an input source being selected that is assigned either
“HDMI”, “COMP” or “VIDEO” (vpage 161), when you
turn the power of the TV off, power to this unit is automatically
set to standby.
Off : This unit does not link with power to a TV.