Marantz SR6008 - Manual (Page 139)

139
Appendix Tips Playback Connections Contents
Front panel Display Rear panel Index Remote
Settings
2 Speakers
Setting items Description Page
Audyssey® Setup The acoustic characteristics of the connected speakers and listening room are measured and the optimum settings are made
automatically.
164
Manual Setup Perform when setting the speakers manually or when changing settings made in Audyssey® Setup. 173
Amp Assign Select power amplifier usage method to match your speaker system. 173
Speaker Config. Indicate speaker presence and select speaker size categories based on bass reproduction capability. 174
Distances Set distance from listening position to speakers. 176
Levels Set the volume of the test tone to be the same when it is output from each speaker. 176
Crossovers Set the maximum frequency of the bass signal output from each channel to the subwoofer. 177
Bass Set subwoofer and LFE signal range playback. 178
Front Speaker Set the front speakers to use for every sound mode. 178
2 Network
Setting items Description Page
Information Display network information. 179
IP Control Enables network communication in standby power mode. 179
Friendly Name The Friendly Name is the name of this unit displayed on the network. You can change the Friendly Name according to your
preferences.
179
Settings Make settings for wired LAN. 180
Diagnostics Used to check the network connection. 181
Maintenance Mode Use when receiving maintenance from a Marantz service engineer or custom installer. 182