Marantz SR6008 - Manual (Page 159)

159
Appendix Tips Playback Connections Contents
Front panel Display Rear panel Index Remote
Settings
On Screen Display
Select the on-screen display user interface preferences.
2 Volume
Sets where to display the master volume level.
Bottom (Default) : Display at the bottom.
Top : Display at the top.
Off : Turn display off.
%
• When the master volume display is hard to see when superimposed text
(closed captioning) or movie subtitles are present, set to “Top”.
2 Info
Displays status of operation temporarily when the sound mode is
changed, or input source is switched. You can set whether or not to
show each of these status displays.
On (Default) : Turn display on.
Off : Turn display off.
2 Now Playing
Sets how long each menu is displayed when the input source is
“NETWORK”, “iPod/USB”, or “TUNER”.
Always On (Default) : Show display continuously.
Auto Off : Show display for 30 seconds after operation.
TV Format
Set the video signal format to be output for the TV you are using.
2 Format
NTSC (Default) : Select NTSC output.
PAL : Select PAL output.
%
• “Format” can also be set by the following procedure. However, the menu
screen is not displayed.
1. Press and hold the main unit’s ZONE2 SOURCE and STATUS for at least 3
seconds.
“Video Format <NTSC>” appears on the display.
2. Use the main unit’s PRESET CH +, – and set the video signal format.
3. Press the main unit’s STATUS to complete the setting.
NOTE
• When a format other than the video format of the connected TV is set, the
picture will not be displayed properly.