Marantz SR6008 - Manual (Page 200)

200
Appendix Settings Playback Connections Contents
Front panel Display Rear panel Index Remote
Tips
Symptom Cause/Solution Page
No audio is output from PRE OUT or
speakers for ZONE2.
• In ZONE2, the audio can be played back when signals input from digital terminals (OPTICAL/
COAXIAL) are in 2ch PCM format.
• In ZONE2, the audio can be played back when signals input from the HDMI terminal are in
2ch PCM format. To play back the audio in ZONE2 irrespective of the input signal format, set
the “HDMI Audio” setting in the menu to “PCM”. Depending on the played back device, the
audio may not be played back even with this setting. In that case, set the audio format to
“PCM (2ch)” on the played back device.
–
184
2 Sound is interrupted or noise occurs
Symptom Cause/Solution Page
During playback from the Internet
radio or USB memory device, sound
is occasionally interrupted.
• When the transfer speed of the USB memory device is slow, sound may occasionally be
interrupted.
• The network communication speed is slow or the radio station is busy.
–
–
When making a call on iPhone, noise
occurs in audio output on this unit.
• When making a call, keep a distance of 20 cm or longer between iPhone and this unit. –
Noise often occurs in FM/AM
broadcasting.
• Change the antenna orientation or position.
• Separate the AM loop antenna from the unit.
• Use an FM outdoor antenna.
• Separate the antenna from other connection cables.
44
44
44
44