Marantz SR6008 - Manual (Page 63)

63
Appendix Tips Settings Connections Contents
Front panel Display Rear panel Index Remote
Playback
Listening to FM/AM broadcasts
1 Press TUNER to switch the input source to “TUNER”.
GTV ScreenH
TUNE+/-
STEREO AUTO
CH / OPTION
TUNER
FM 92.10MHz
Now Playing
Tune Preset Option
CH 1
GDisplay of this unitH
2 Press OPTION.
The option menu screen is displayed.
3 Use ui to select “FM/AM”, then press ENTER.
4 Use o p to select “FM” or “AM”, then press ENTER.
FM : When listening to an FM broadcast.
AM : When listening to an AM broadcast.
5 Press TUNE + or TUNE – to select the station you want
to hear.
Scanning is performed until it finds an available radio station. When
it finds a radio station, it stops the scan automatically and tunes in.
%
• The modes for receiving FM broadcasts consists of “Auto” mode that automatically
searches available broadcast stations and “Manual” mode that lets you tune in
using buttons to change the frequency. The default setting is “Auto”. You can also
use “Direct Tune” to tune in by entering the frequency directly.
In “Auto” mode, you cannot tune in to radio stations if the reception is not good. If
this is the case, then use the “Manual” mode or “Direct Tune” to tune in.
Operation buttons Function
TUNE +, – Tuning (up/down)
CH/PAGE df Preset channel selection
FAVORITE STATION
1 – 3
Call up favorite stations
(Press and hold)
Add to the favorite stations