NavCom StarFire Satellite Change Rev.I - Manual (Page 2)

Troubleshooting Guide – StarFire™ Satellite Changes
Rev. I ii Release - June 15
Table 1: Satellite Assignments for Net 2 and Net 1 Change
Old New Start Date Stop Date
Satellite ID Net
Frequency
(KHz)
Satellite ID Net
Frequency
(KHz)
Satellite
New Service
on-air
Old service
discontinued
54W 446 2 1,539,842.5 54W 446 2 1,545,977.5 3F4 11/1/2014 12/15/2014
15.5W 484 2 1,539,852.5 15.5W 484 2 1,545,987.5 3F3 11/1/2014 12/15/2014
64E 564 2 1,539,872.5 64E 564 2 1,545,967.5 4F1 11/1/2014 12/15/2014
178E 678 2 1,539,862.5 178E 678 2 1,545,987.5 4F3 11/1/2014 12/15/2014
98W 402 1 1,539,892.5 98W 402 1 1,545,967.5 PAC-E 06/12/2015 07/15/2015
25E 525 1 1,539,872.5 25E 525 1 1,545,885.0 IND-W 06/12/2015 07/15/2015
143.5E 643 1 1,539,862.5 143.5E 643 1 1,545,977.5 PAC-W 06/12/2015 07/15/2015
As seen from the Start date column, all new StarFire are currenlty broadcasting on the new satellite / frequency
combination. The Stop date is the date StarFire will stop broadcasting the current satellite / frequency combination.
During the time between the start and stop dates both the new and old frequencies/satellites will be active.
The table below provides a quick overview of affected products and a brief summary of the impact to the receiver
model by software version number. The table is divided into 2-categories: 3-Satellite StarFire constellation base
for those customers who have not updated software recently and 6-Satellite StarFire constellation base for those
customers who have updated software recently.
Table 2: Model Impact on Old Firmware
Product
3-Satellite Network
Software Versions
Impact
6-Satellite Network
Software Versions
Impact
New Software
Versions
NCT-2000D No StarFire Module None No StarFire Module None None
NCT-2100D No StarFire Module None No StarFire Module None None
NCT-2030(M) No StarFire Module None No StarFire Module None None
RT-3010S No StarFire Module None No StarFire Module None None
RT-3020S No StarFire Module None No StarFire Module None None
SF-2040G
GPS v3.1.17 and
earlier
LBM v1.5 and earlier
Manual tuning
of Channel ID;
No auto-
transistion
globally
GPS v3.2.9 to v5.1.13
LBM v3.0 and later
Manual tuning
of frequency to
acquire globally
------------
No auto-
transition
globally
between
regions
GPS v3.2.12
and v5.1.18 with
LBM v3.10 and
later
SF-2050G/M/R
GPS v3.1.17 and
earlier
LBM v1.5 and earlier
GPS v3.2.9 to v5.1.13
LBM v3.0 and later
GPS v3.2.12
and v5.1.18 with
LBM v3.10 and
later
SF-2110 Not Applicable None v1.5.71 or 2.2.8
v2.2.12 and
later
Sapphire Not Applicable None v2.2.9.0
v3.5.XX and
later
SF-3050 Not Applicable None v2.2.9.0
SF-3040 Not Applicable None v2.1.7.0
Based on the table above, identify the software in your unit and refer to the appropriate section below.