Orion System PT-Link II BACnet2 - Manual (Page 27)

PT-Link II Interface
PT-Link II BACnet ® Technical Guide
27
Appendix A
Use the standard EIA/TIA color code for "CROSS OVER CABLE" as shown.
It is the same as a standard Cat 5 patch cabling. The outer cable jacket should
Be "Orange" in color. This is a straight thru pin 1 to pin 1 cable.
not
not
1
2
3
4
5
6
RJ-45 Connector as viewed
from the bottom side
8
7
6
5
4
3
RJ-45 Connector as viewed
from the bottom side
Brown/White
White/Brown
Orange/White
White/Blue
Blue/White
White/Orange White/Orange
Orange/White
White/Green
Blue/White
White/Blue
Green/White
Figure 31: RJ-45 8P8C Cable for WattMaster Cross Over Networking - WattMaster Part #HZ000136