Orion System PT-Link II BACnet2 - Manual (Page 29)

PT-Link II Interface
PT-Link II BACnet ® Technical Guide
29
Appendix B
Segmentation Capability:
None
Standard Object Types Supported
 Device Object
 Analog Input
 Analog Output
 Analog Value

Binary Input

Binary Output

Binary Value

Multi State Input

Multi State Output

Multi State Value

Notifi cation Class Object
For all of these properties, the following applies:
1). Does not support BACnet CreateObject
2.) Does not support BACnet DeleteObject
3.) No proprietary properties exist
Data Link Layer Options:
 BACnet IP, (Annex J)
 MS/TP master (Clause 9), baud rate up to 76.8 Kbps
 MS/TP slave (Clause 9), baud rate up to 76.8 Kbps
Device Address Binding:
Not supported
Networking Options:

Router, Clause 6 – List all routing confi gurations,
e.g., ARCNET-Ethernet, Ethernet-MS/TP, etc.

Annex H, BACnet Tunneling Router over IP
 BACnet/IP Broadcast Management Device (BBMD)
 Registrations by Foreign Devices
Character Sets Supported:
Where support for multiple character sets is indicated, this does not
imply that they can all be supported simultaneously.

ANSI X3.4

ISO 10646 (UCS-2)

IBM/Microsoft DBCS
 ISO 10646 (ICS-4)
 ISO 8859-1
 JIS C
Revised 4/25/11