Quintum Technologies Tenor Call Relay 60 - Manual (Page 49)

P/N 480-0076-00-00 5-5
Chapter 5: System Alarms
Major Switch to other RADIUS server Appears when the current RADIUS server stops
responding after three consecutive calls end in timeouts
and another RADIUS server is configured. The Tenor
will then switch to the next RADIUS server.
Minor Call Event(s) Lost A call has failed.
Minor Missing or Incorrect Profile The configuration profile has caused a problem.
Minor Minor Software Error A software error has occurred but will not affect the
operation of the complete system.
Minor Call Relay 60 resource constrained A shared resource in the unit loads the system.
Minor Hardware component failed A hardware component has failed. Check all compo-
nents, hardware connections, etc.
Minor Log RADIUS server error Displayed when the RADIUS server fails to send
required data or the data sent by the RADIUS server has
improper values. Incorrect information may contain the
following:
RADIUS Server: Credit amount (-1)
RADIUS Server: Credit minus amount
RADIUS Server: Not supported currency
RADIUS Server: Credit time (-1)
RADIUS Server: Credit time < 6 sec
RADIUS Server: Invalid error code
Informational Gatekeeper status Reports the status of the Gatekeeper.
Informational Miscellaneous information Miscellaneous information about the unit is reported.
The contents of this alarm will vary.
Informational Info Software Error Indicates information about miscellaneous software
error. This does not affect system operation.
Severity
(appears as
part of severity
field)
Alarm Description
(text appears in desc field)
Definition