Seaward 300 PrimeTest - Manual (Page 17)

PrimeTest 300
Operating Instructions
- 16 -
4.0 Unit Description
Refer to fig. 1 and fig. 2.
The PrimeTest 300 is a hand held, multi function,
instrument designed to perform electrical safety tests on
Class I and Class II equipment as well as performing
installation checks.
Identifying parts of the unit
1 LCD Display
2
ON/START key. Used to switch the PrimeTest
300 on or to start manual and automatic tests
3
OFF/STOP key. Used to switch the PrimeTest
300 off or to stop manual and automatic tests
4 F1 – F4 Function keys. The purpose of these
keys changes depending upon the mode of the
instrument. The lower part of the LCD display
describes these functions.
5 Arrow keys. These keys are used to navigate
the menu system and set up the instrument.
6 EUT socket. Fit the mains plug of the
Equipment Under Test into this socket.
7 Charger Inlet. Fit the Seaward PT-01 Charger
into this socket.
8 IEC Mains Inlet. Fit the Seaward mains cable
into this socket. Required during powered tests.
Also used for testing IEC mains leads.
9 Probe socket. Plug the black lead into this
socket.