Seaward 300 PrimeTest - Manual (Page 53)

PrimeTest 300 Operating Instructions
- 52 -
12.0 Bluetooth Functions
The PrimeTest 300 has built in Bluetooth connectivity. It
is possible to connect a variety of devices to the
PrimeTest 300 via the Bluetooth link:
PC – required to download stored data, to upload, to
upload configuration, test and program data.
Barcode Scanner – required for scanning asset labels.
Printers – required for printing pass/fail labels and
barcode labels.
The PrimeTest 300 will automatically search for the
appropriate accessory or device when a function
requiring a connection is performed.
Note: When attempting to print a pass/fail label the
PrimeTest 300 will automatically connect to
the
printer assigned in the Bluetooth
Favourites.
Similarly, when data is required from a
barcode scanner, the PrimeTest 300 will
automatically connect to the barcode scanner
assigned in the Bluetooth Favourites.
12.1 Bluetooth USB Adapter
The PrimeTest 300 is supplied complete with a
Bluetooth USB Adapter. This device can be used to add
Bluetooth connectivity to a PC or Laptop which is not
already Bluetooth enabled. Full installation instructions
are provided in the Bluetooth USB Adapter Setup guide.
Note: The adapter must not be plugged into the USB
port until specifically requested to do so by
the install program.
12.2 Bluetooth Favourites
In order for the PrimeTest 300 to automatically connect
to the correct Bluetooth accessory, details of that
accessory must be entered into the Bluetooth Favourites
list.