Seaward 300 PrimeTest User Manual

Page 22

Advertising
background image

PrimeTest 300

Operating Instructions

- 21 -

6.3 Send/Receive Config Data

This feature can be used to transfer Site, Location,
User
and Comments lists to/from a PC. It can be used
to configure individual PrimeTest 300 units with identical
Site, Location, User and Comments lists.

6.3.1 Send Config Data

To Send configuration data from a PC, press Menu
(F4), select Data Transfer using the arrow keys, select
Send/Receive Config Data and press OK (F4).

The PrimeTest 300 will now attempt to connect to the
Bluetooth Favourite PC. When a connection has been
established the display will be as shown below.

Open the Bluetooth Downloader application on your PC
and check that the Com Port for the Bluetooth serial port
(provided by the Bluetooth USB adapter) is selected.
The baud rate will default to the correct value of 57600.

The Send (F4) key will transfer the Site, Location, User
and Comments list from the PrimeTest 300 to the PC as
text which will appear in the Bluetooth Downloader
screen.

Note: The file transfer can be made using any

suitable PC application such as the Seaward
Bluetooth

Downloader

or

Hyperterminal

capable of sending and receiving a text file.

Advertising