Seaward 300 PrimeTest User Manual
Page 69
Advertising
PrimeTest 300
Operating Instructions
- 68 -
To enter a value, simply move the cursor to the correct
field using the UP/DOWN arrows
Now enter the required number of months using the
keypad and press Enter (F4) to accept.
The Asset Details are now complete and the PrimeTest
300 is ready to perform the test.
13.6 Running the test sequence
When the required Asset ID, Test Sequence, Site,
Location and Test Period details have been entered,
press the OK (F4) key to initiate the chosen test
sequence.
Advertising