Seaward 300 PrimeTest - Manual (Page 77)

PrimeTest 300
Operating Instructions
- 76 -
The
Test Type field indicates whether the sequence
was a visual inspection only or a full test where
measured
values were recorded during the test
sequence. Test sequences that do not involve the
recording of measured values have the Test Type is set
to Visual.
13.7 Options
Pressing
Options (F3) offers a list of post-test options
as shown below.
This allows the user to view the results of each test
performed, view the test sequence, view information
about the EUT, print the test results or print a label.