Seaward 300 PrimeTest - Manual (Page 30)

PrimeTest 300 Operating Instructions
- 29 -
9.1.4 Creating a New Sequence
A new test sequence can be created using this option.
The default name for a new sequence is “New
Sequence n” where n is the next available sequence
number. There are 13 factory sequences and so the first
time New Sequence is used the default name is “New
Sequence 14”.
To build the new sequence, use the arrow keys to
highlight the sequence name and press Edit (F4) to
open the sequence editor as shown below.
Pressing Edit (F4) allows the sequence name to be
changed.
To insert a test into the sequence, press Insert (F1) to
open the Insert Test window and use the left or right
arrow key to show the list of available tests.