Seaward 300 PrimeTest - Manual (Page 76)

PrimeTest 300 Operating Instructions
- 75 -
The next test in this sequence is a Protective Conductor
Current measurement.
The display now shows the supply voltage and
frequency measured prior to starting the test. The
measured leakage current is shown in real time on both
the digital display and the analogue bargraph.
Note: The vertical bar midway along the analogue
bargraph indicates the Limit value (in this case
5.00mA).
The test sequence is now complete. The display at the
end of a sequence depends upon the options set in
Menu – User Options – Test Options as described in
section 10.1.3.
The example below shows the end of test screen when
Menu – User Options – Test Options has been
configured for Options Menu.