Verilink DIU 2130 (880-503297-001) Product Manual - Manual (Page 29)

DIU 2130 Configuration
Verilink 3-5
Figure 3-2 DIU 2130 Configuration Menu
The CSU command assigns the DIU 2130 module to the CSU it will
use. Since the SCC 2020 contains a TAC 2010 CSU module, it will
be used for the CSU in this example.
Type C and press ENTER.
At the enter shelf > enter shelf > enter shelf > enter shelf > prompt type 1 and at the enter slot > enter slot > enter slot > enter slot > prompt
type 1 again.
This selects the SCC 2020 in slot 1 of shelf 1 as the CSU for this DIU
2130 module.
The Timing Source defaults to CSU, meaning that the DIU 2130 will
derive its transmit clock from the source selected in the CSU
configuration (recovered network clock in this example). This is
correct for this example.
The DS0 (timeslot) selection prompt appears as an uppercase D DD D
with a lowercase pppp. The lowercase pppp is a variable. Instead of typing
“ pppp”, use a port number, 1 or 2. For this example, timeslots 1
through 12 are to be used on Data Port 1 and timeslots 13 through
24 are to be assigned to Data Port 2.
Type D1 and press ENTER.
At the prompt enter port 1 channels > enter port 1 channels > enter port 1 channels > enter port 1 channels > type 1-12 and press ENTER.
This assigns timeslots 1 through 12 to Data Port 1.
Now type D2 and press ENTER.
--- DIU 2130 CONFIGURATION/DIAGNOSTIC MENU --- --- DIU 2130 CONFIGURATION/DIAGNOSTIC MENU --- --- DIU 2130 CONFIGURATION/DIAGNOSTIC MENU --- --- DIU 2130 CONFIGURATION/DIAGNOSTIC MENU ---
C) CSU [ 0,0 ] C) CSU [ 0,0 ] C) CSU [ 0,0 ] C) CSU [ 0,0 ]
T) timing source CSU
T) timing source CSU T) timing source CSU T) timing source CSU
chnl 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 chnl 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 chnl 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 chnl 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
Dp)port .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..
Dp)port .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. Dp)port .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. Dp)port .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..
Lead Toggles DTR) DSR) RTS) CTS) DCD) Lead Toggles DTR) DSR) RTS) CTS) DCD) Lead Toggles DTR) DSR) RTS) CTS) DCD) Lead Toggles DTR) DSR) RTS) CTS) DCD)
Forced Ports -/- -/- -/- -/- -/-
Forced Ports -/- -/- -/- -/- -/- Forced Ports -/- -/- -/- -/- -/- Forced Ports -/- -/- -/- -/- -/-
Port 1 Port 2 Statistics Port 1 Port 2 Statistics Port 1 Port 2 Statistics Port 1 Port 2 Statistics
Mp) mode 56K 56K FW/HW Rev.............1.6/0.8
Mp) mode 56K 56K FW/HW Rev.............1.6/0.8 Mp) mode 56K 56K FW/HW Rev.............1.6/0.8 Mp) mode 56K 56K FW/HW Rev.............1.6/0.8
Sp) scram/hdlc inv N/N N/N Battery...............OK
Sp) scram/hdlc inv N/N N/N Battery...............OK Sp) scram/hdlc inv N/N N/N Battery...............OK Sp) scram/hdlc inv N/N N/N Battery...............OK
Kp) clocking ST ST DTE Intf..............V.35/V.35
Kp) clocking ST ST DTE Intf..............V.35/V.35 Kp) clocking ST ST DTE Intf..............V.35/V.35 Kp) clocking ST ST DTE Intf..............V.35/V.35
Gp) LOS lead NONE NONE Data bus..............NONE
Gp) LOS lead NONE NONE Data bus..............NONE Gp) LOS lead NONE NONE Data bus..............NONE Gp) LOS lead NONE NONE Data bus..............NONE
Ep) enable loop YES YES Tp) test and monitor BEC Ep) enable loop YES YES Tp) test and monitor BEC Ep) enable loop YES YES Tp) test and monitor BEC Ep) enable loop YES YES Tp) test and monitor BEC
Np) near loopback OFF OFF Pp) monitor leads and status
Np) near loopback OFF OFF Pp) monitor leads and status Np) near loopback OFF OFF Pp) monitor leads and status Np) near loopback OFF OFF Pp) monitor leads and status
Fp) far loopback ON OFF A) Alarm Enable......YES
Fp) far loopback ON OFF A) Alarm Enable......YES Fp) far loopback ON OFF A) Alarm Enable......YES Fp) far loopback ON OFF A) Alarm Enable......YES
[1,2] DIU 2130 > [1,2] DIU 2130 > [1,2] DIU 2130 > [1,2] DIU 2130 >