Verilink HDM 2182 (880-502925-001) Product Manual - Manual (Page 20)

HDM 2182 Quick Set-Up
2-4 Verilink HDM 2182 User Manual
Figure 2-3 Configuration Menu
Network Port The DS3 network port is usually configured before the HSSI ports.
Press E
NTER after typing each command letter.
1. Type “P” to display the Port Configuration Menu ( Figure 2-4 ).
Figure 2-4 DS3 Configuration Menu
2. Type “P” to display the prompt:
Enter Port Id(38 char)
Enter an identifying character string (no more than 38
characters) to specify the Port ID.
3. Type “C” to display the prompt:
Enter Circuit Id(26 char)
Enter an identifying character string (no more than 26
characters) to specify the Circuit ID.
A [127.255.255.0] [1,1] HDM 2182 > c A [127.255.255.0] [1,1] HDM 2182 > c A [127.255.255.0] [1,1] HDM 2182 > c A [127.255.255.0] [1,1] HDM 2182 > c
-- HDM 2182 CONFIGURATION MENU -- -- HDM 2182 CONFIGURATION MENU -- -- HDM 2182 CONFIGURATION MENU -- -- HDM 2182 CONFIGURATION MENU --
P) DS3 Port Setup H) HSSI A Port Setup
P) DS3 Port Setup H) HSSI A Port Setup P) DS3 Port Setup H) HSSI A Port Setup P) DS3 Port Setup H) HSSI A Port Setup
I) HSSI B Port Setup
I) HSSI B Port Setup I) HSSI B Port Setup I) HSSI B Port Setup
x) Exit this screen
x) Exit this screen x) Exit this screen x) Exit this screen
A [127.255.255.0] [1,1] HDM 2182 > A [127.255.255.0] [1,1] HDM 2182 > A [127.255.255.0] [1,1] HDM 2182 > A [127.255.255.0] [1,1] HDM 2182 >
A [127.255.255.0] [1,1] HDM 2182 > p A [127.255.255.0] [1,1] HDM 2182 > p A [127.255.255.0] [1,1] HDM 2182 > p A [127.255.255.0] [1,1] HDM 2182 > p
-- HDM 2182 Port Configuration Menu --
-- HDM 2182 Port Configuration Menu -- -- HDM 2182 Port Configuration Menu -- -- HDM 2182 Port Configuration Menu --
- Line Code B3ZS
- Line Code B3ZS - Line Code B3ZS - Line Code B3ZS
- AIS C-Bit 0
- AIS C-Bit 0 - AIS C-Bit 0 - AIS C-Bit 0
T) Timing Recover Clock
T) Timing Recover Clock T) Timing Recover Clock T) Timing Recover Clock
B) Line Build Out Normal Cable <= 250 ft
B) Line Build Out Normal Cable <= 250 ft B) Line Build Out Normal Cable <= 250 ft B) Line Build Out Normal Cable <= 250 ft
H) Line Type C-Bit Parity
H) Line Type C-Bit Parity H) Line Type C-Bit Parity H) Line Type C-Bit Parity
R) Performance Control On
R) Performance Control On R) Performance Control On R) Performance Control On
E) Equipment ID
E) Equipment ID E) Equipment ID E) Equipment ID
L) Location ID
L) Location ID L) Location ID L) Location ID
F) Frame ID
F) Frame ID F) Frame ID F) Frame ID
U) Unit ID
U) Unit ID U) Unit ID U) Unit ID
A) Facility ID
A) Facility ID A) Facility ID A) Facility ID
P) Port ID
P) Port ID P) Port ID P) Port ID
C) Circuit ID
C) Circuit ID C) Circuit ID C) Circuit ID
G) Test Sig ID
G) Test Sig ID G) Test Sig ID G) Test Sig ID
I) Inband Control Enable
I) Inband Control Enable I) Inband Control Enable I) Inband Control Enable
N) FE Inband Mgmt Enable
N) FE Inband Mgmt Enable N) FE Inband Mgmt Enable N) FE Inband Mgmt Enable
X) Exit this screen
X) Exit this screen X) Exit this screen X) Exit this screen
A [127.255.255.0] [1,1] HDM 2182 > A [127.255.255.0] [1,1] HDM 2182 > A [127.255.255.0] [1,1] HDM 2182 > A [127.255.255.0] [1,1] HDM 2182 >