Verilink HDM 2182 (880-502925-001) Product Manual - Manual (Page 45)

Standalone HDM 2182 Management
Verilink HDM 2182 User Manual 3-23
Figure 3-16 Qtr Hr Alerts Crossing Threshold (Local FE) (DS3 Layer Performance Alert Thresholds
Submenu)
Restore Manufacturing Default Config Menu
To restore the manufacturing defaults for the HDM 2182, type the
command B from the Main Menu selection:
B) restore manufacturing default config
The Restore Manufacturing Default Config Menu is displayed.
Note that if you restore the manufacturing defaults after installing
your card and after setting parameters and configuring the ports,
you will have to reboot the board/module, and your system may be
adversely affected.
Figure 3-17 Restore Manufacturing Default Config Menu
HDM > b HDM > b HDM > b HDM > b
--- DS3 Layer Performance Alert Thresholds ---
--- DS3 Layer Performance Alert Thresholds --- --- DS3 Layer Performance Alert Thresholds --- --- DS3 Layer Performance Alert Thresholds ---
P) CCV threshold value : 382
P) CCV threshold value : 382 P) CCV threshold value : 382 P) CCV threshold value : 382
B) CES threshold value : 86
B) CES threshold value : 86 B) CES threshold value : 86 B) CES threshold value : 86
I) CSES threshold value : 4
I) CSES threshold value : 4 I) CSES threshold value : 4 I) CSES threshold value : 4
U) UAS threshold value : 10
U) UAS threshold value : 10 U) UAS threshold value : 10 U) UAS threshold value : 10
X) exit menu
X) exit menu X) exit menu X) exit menu
HDM >
HDM > HDM > HDM >
HDM > b HDM > b HDM > b HDM > b
--- RESTORE MANUFACTURING DEFAULT CONFIG MENU ----
--- RESTORE MANUFACTURING DEFAULT CONFIG MENU ---- --- RESTORE MANUFACTURING DEFAULT CONFIG MENU ---- --- RESTORE MANUFACTURING DEFAULT CONFIG MENU ----
A) TX Diagnostic Alarms
A) TX Diagnostic Alarms A) TX Diagnostic Alarms A) TX Diagnostic Alarms
D) Day Alert Thresholds
D) Day Alert Thresholds D) Day Alert Thresholds D) Day Alert Thresholds
Q) Qrt. Hr. Alert Thresholds
Q) Qrt. Hr. Alert Thresholds Q) Qrt. Hr. Alert Thresholds Q) Qrt. Hr. Alert Thresholds
P) DS3 Port Configuration
P) DS3 Port Configuration P) DS3 Port Configuration P) DS3 Port Configuration
S) SNMP Configuration
S) SNMP Configuration S) SNMP Configuration S) SNMP Configuration
H) HSSI Port A & B Configuration
H) HSSI Port A & B Configuration H) HSSI Port A & B Configuration H) HSSI Port A & B Configuration
X) exit menu
X) exit menu X) exit menu X) exit menu
HDM >HDM >
HDM >HDM > HDM >HDM > HDM >HDM >