Verilink HDM 2182 (880-502925-001) Product Manual - Manual (Page 50)

HDM 2182 Management: Using NCM 2000
4-2 Verilink HDM 2182 User Manual
NCM Controller Menu (Main Menu)
The NCM Controller Menu (Main Menu) displays the contents of
slots in the shelves of the selected node. This manual deals with
the HDM 2182 module in particular and the NCM module with
regard only to how the NCM module interacts with the HDM 2182
module. In the Main Menu:
• Slots display a G at the intersection of rows and columns that
designate the shelf/slot location of the HDM 2182 module.
• The letter N displays the NCM module location.
• The letter surrounded by brackets ( [ ] ) designates the
location of the currently active module that can be referenced
and modified using the displayed menu.
• On initial log in, the brackets surround the module being used
as the log-in access point (for example, the NCM).
• The Main Menu option S (shelf/slot) is used to move to a
desired module in the node.
In Figure 4-1, the Main Menu shows an HDM 2182 (designated by G)
in slot 1. From the S) shelf/slot command, the currently accessed
module indicated by the square brackets ([ ]) has been changed to
the HDM 2182 in slot 1. The asterisk next to the N indicates that the
NCM 2000 module is the node master. The A at the beginning of the
prompt line indicates that the NCM 2000 you are accessing is the
active NCM master.