Verilink HDM 2182 (880-502925-001) Product Manual - Manual (Page 32)

Standalone HDM 2182 Management
3-10 Verilink HDM 2182 User Manual
HSSI Port
Configuration
From the Port Configuration Menu, select H or I for the HSSI Port
A or HSSI Port B options to display the HSSI Port Configuration
menus. The following examples show the display and options for
HSSI Port A. The display and options are the same for HSSI Port B.
Figure 3-5 HSSI Port A Configuration Submenu
P Port ID—Displays the current status and provides a prompt asking if you want to
change the status as follows (38 characters maximum):
HDM > p
Current DS3 Port ID: . Change (Y/N)? y
Please enter new DS3 Port ID(38):
G Port Test Sig ID—Displays the current status and provides a prompt asking if you
want to change the status as follows (38 characters maximum):
HDM > g
Current DS3 Test Sig Generator ID: . Change (Y/N)? y
Please enter new DS3 Port Test Sig Generator ID(38):
X exit menu—Returns you to the Port Configuration Menu , Figure 3-3.
Command Description
--- HSSI PORT A CONFIGURATION --- --- HSSI PORT A CONFIGURATION --- --- HSSI PORT A CONFIGURATION --- --- HSSI PORT A CONFIGURATION ---
Near End Data Rate : 14, (22.4 Mbps) Channel: 15 to 28 Near End Data Rate : 14, (22.4 Mbps) Channel: 15 to 28 Near End Data Rate : 14, (22.4 Mbps) Channel: 15 to 28 Near End Data Rate : 14, (22.4 Mbps) Channel: 15 to 28
Far End Data Rate : 14, (22.4 Mbps) Channel: 15 to 28
Far End Data Rate : 14, (22.4 Mbps) Channel: 15 to 28 Far End Data Rate : 14, (22.4 Mbps) Channel: 15 to 28 Far End Data Rate : 14, (22.4 Mbps) Channel: 15 to 28
C) Change Circuit ID : Port A C) Change Circuit ID : Port A C) Change Circuit ID : Port A C) Change Circuit ID : Port A
S) Port State : Out of Service
S) Port State : Out of Service S) Port State : Out of Service S) Port State : Out of Service
M) Port Configuration Mode : Automatic Mode
M) Port Configuration Mode : Automatic Mode M) Port Configuration Mode : Automatic Mode M) Port Configuration Mode : Automatic Mode
R) Change Near End Data Rate
R) Change Near End Data Rate R) Change Near End Data Rate R) Change Near End Data Rate
A) Scrambling : Disabled
A) Scrambling : Disabled A) Scrambling : Disabled A) Scrambling : Disabled
X) exit menu
X) exit menu X) exit menu X) exit menu
HDM > HDM > HDM > HDM >