Verilink HDM 2182 (880-502925-001) Product Manual - Manual (Page 68)

Standalone HDM 2182 SNMP Management
5-2 Verilink HDM 2182 User Manual
Embedded
Network
Management
System Using
SNMP
The SNMP port connects to an Ethernet segment connected to a PC
running a user-supplied SNMP application, such as Verilink’s Node
Manager. Using such an application and depending on the
Management Information Base (MIB) interfaces provided, you can
configure, control, and monitor the performance of an HDM 2182
circuit.
HDM 2182 allows appropriate values to be assigned to and
collected from the configuration management objects defined in
the supported MIBs.
An integrated (embedded) SNMP agent is used in the product. HDM
2182 is a separate manageable network entity under the SNMP
management application protocol. All configuration, control, and
monitoring elements that are handled via the ASCII terminal are
available to the SNMP agent. The embedded management services
provide information for network managers, system administrators,
customer service, field service personnel, and engineers to manage
the HDM 2182.
HDM 2182 SNMP
Physical
Interfaces
The only physical interface provided for SNMP on the circuit card
assembly is a 10BaseT Ethernet twisted pair implementation. A SLIP
interface is not supported.
Management
Protocols
HDM 2182 embedded SNMP supports SNMPv1. These standard
network management protocols support the following areas:
• Implementation of standard MIBs
• Implementation of enterprise-specific MIBs
• Remote booting
• Configuration Management
• Operator-selected saving of card configuration management
objects and default settings into non-volatile storage onboard.
• During normal restart, in the absence of valid non-volatile
configuration management objects, the HDM 2182 assumes a
default configuration.
• Alarm and fault reporting and management, remote system
diagnostics
• Embedded management offers extensive diagnostics. Alarms
are offered through SNMPv1 generic traps with additional
alarm information available through Verilink enterprise
specific traps.
• HDM 2182 reports faults by sending the generic SNMPv1 traps
to appropriate SNMPv1 node management systems.
• Security Management