Verilink HDM 2182 (880-502925-001) Product Manual - Manual (Page 56)

HDM 2182 Management: Using NCM 2000
4-8 Verilink HDM 2182 User Manual
HSSI Port n
Configuration
Menus
Selecting either
H
or
I
from the Configuration Menu displays the
HSSI Port n Configuration Menu (that for HSSI Port A is shown
below as an example).
Figure 4-5 HSSI Port A Configuration Menu
L Location ID—This optional parameter allows you to enter up to 11
characters to describe the location of your equipment. It will also prompt
if you want to clear the string.
F Frame ID—This optional parameter allows you to enter up to 10
characters to define the Frame ID. It will also prompt if you want to clear
the string.
U Unit ID—This optional parameter allows you to enter up to 6 characters to
define the Unit ID. It will also prompt if you want to clear the string.
A Facility ID—This optional parameter allows you to enter up to 38
characters to define the Facility ID. It will also prompt if you want to clear
the string.
P Port ID—This optional parameter allows you to enter up to 38 characters
to define the Port ID. It will also prompt if you want to clear the string.
C Circuit ID—This optional parameter allows you to enter up to 26
characters to define the Circuit ID. It will also prompt if you want to clear
the string.
G Test Sig ID—This optional parameter allows you to enter a single
character to define the Test Signal ID. It will also prompt if you want to
clear the string.
I Inband Control—Toggles between Enable and Disable for an inband
channel between the NE and FE DS3 ports.
1) Enable
2) Disable
X Exit this screen—Returns you to the HDM Configuration Menu ,
Figure 4-4.
Command Description Options
-- HDM 2182 HSSI A Configuration Menu -- -- HDM 2182 HSSI A Configuration Menu -- -- HDM 2182 HSSI A Configuration Menu -- -- HDM 2182 HSSI A Configuration Menu --
I) Circuit ID Port A I) Circuit ID Port A I) Circuit ID Port A I) Circuit ID Port A
P) Port Status OUT OF SERVICE
P) Port Status OUT OF SERVICE P) Port Status OUT OF SERVICE P) Port Status OUT OF SERVICE
M) Configuration Mode Automatic
M) Configuration Mode Automatic M) Configuration Mode Automatic M) Configuration Mode Automatic
D) HSSI Data Rate Mode NE Only
D) HSSI Data Rate Mode NE Only D) HSSI Data Rate Mode NE Only D) HSSI Data Rate Mode NE Only
R) HSSI Data Rate 14, (22.4 Mbps)
R) HSSI Data Rate 14, (22.4 Mbps) R) HSSI Data Rate 14, (22.4 Mbps) R) HSSI Data Rate 14, (22.4 Mbps)
A) Data Scramble Disable
A) Data Scramble Disable A) Data Scramble Disable A) Data Scramble Disable
X) Exit this screen
X) Exit this screen X) Exit this screen X) Exit this screen
A [127.255.255.0] [1,1] HDM 2182 > A [127.255.255.0] [1,1] HDM 2182 > A [127.255.255.0] [1,1] HDM 2182 > A [127.255.255.0] [1,1] HDM 2182 >