Verilink QUAD DATA (880-503319-001) Product Manual - Manual (Page 16)

Quick Set-Up
2-2 Verilink QUAD DATA User Manual
Figure 2-1 illustrates the shelf configuration for this example.
Figure 2-1 Example Configuration
Log In Connect a Craft cable to the port labelled LOCAL on the front of the
SCM module.
Connect the other end of the Craft cable to your PC or terminal. If
using a PC, start a session in a terminal program.
1. Set your terminal parameters to:
• 19.2 kbit/s
• 8 data bits
• No parity
• One stop bit
• No flow control
2. Press E NTER .
3. The prompt pSH+> pSH+> pSH+> pSH+> appears.
4. Type “craft” (use lowercase)
5. The prompt Your Password Your Password Your Password Your Password appears.
SCM M1-3
QUAD
DATA
QUAD
T1
Router
T3
Services
T1
Services
Codec Mainframe