WattMaster WCC II - Manual (Page 132)

Section 3: Screen Descriptions
WCC II Operator’s Guide
Operator Interfaces 3-100
II to report an “SOS” alarm if it has received 10 “Satellite Failure”
messages in a row.
If the user does not specify a number in this section, the ECC/
WCC II will report an “SOS” alarm after one “Satellite Failure”
message. We have found that our method of determining whether a
satellite is still communicating is too sensitive, and we recommend
a number between 5 and 10 for most systems if problems of this
type are encountered.
Disable Energy Consumption print out: NO
If the system is using one or more of the 10 Energy Consumption
Screens, the accumulated data will automatically be printed once
an hour. If you do not want the ECC/WCC II to print this energy
consumption report each hour, enter a “NO” in this section. Pressing
the
<space bar> will change the value from YES to NO. Pressing
<Enter> when the desired value is displayed will enter that choice.
“YES” is assumed by the system unless instructed otherwise.
Clear disk-write-error fl ag: NO
If the ECC/WCC II cannot write a fi le to disk because there is
not enough space left on the disk, a “disk-write-error” message
will appear on the Main Menu Screen. To clear the message, select
“Yes” as the choice for this fi eld.
Time delay for screen blank: 5 minutes
If the system does not detect any keyboard activity for this amount
of time, the screen will go blank. The screen is restored by pressing
the
<space bar> .