WattMaster WCC II - Manual (Page 152)

Section 3: Screen Descriptions
WCC II Operator’s Guide
Operator Interfaces 3-120
The Operator Message Screen allows you to leave messages for
fellow employees or for people who might be calling the system
from a remote computer. If a message has been entered on this
screen, the word “Message!” will appear on the Main Menu.
To enter a message, simply type the message and press <Enter>
after each line.
To delete a message, move the cursor to the line that is to be deleted
and press
<Ctrl> and <Home> simultaneously. Each individual
line must be deleted separately. After all of the messages have been
deleted, the word “Message” on the Main Menu will disappear.
MESSAGE SCREEN
-----------------------------------------------------------------------------------------
Operator Message 13:20 11/10
Joe, change the belts and fi lters on AHU #1
Bill, leave compressor #3 & 4 on AHU #5 off, they are low on refrigerant
HOME for menu
-----------------------------------------------------------------------------------------