WattMaster WCC II - Manual (Page 137)

Section 3: Screen Descriptions
WCC II Operator’s Guide
Operator Interfaces 3-105
The fi rst twenty zones will appear on the screen. If more than
twenty zones match the description, use the arrow keys to move
the cursor down to the area on the screen where the zones are
displayed and press
<PgDn> .
Continue Present Search: NO
You can eliminate the unwanted zones on the screen by moving the
cursor to “Continue Present Search,” pressing the
<space bar>
until “Yes” appears, and then pressing <Enter> . Now move the
cursor to “String to Match” and enter the rest of the description that
you want to match.
Screen Access
After you have found the “point” you are looking for, you can
access its screen by simply using the arrow keys to position the
cursor (>) at the left of the point you want to access and pressing
<Enter> .
Notes: