Analog trend trend log screen – WattMaster WCC II User Manual

Page 60

Advertising

Section 3: Screen Descriptions

WCC II Operator’s Guide

Operator Interfaces

3-28

Satellite #: ____

Speciﬁ es the number of the satellite you are currently editing.
If you would like to edit a different satellite, simply position the
cursor to this ﬁ eld by using the cursor positioning (arrow) keys,
enter the desired satellite number, and press

<Enter>

Trend Log #: ____

This ﬁ eld actually contains two separate ﬁ elds. The ﬁ rst ﬁ eld
speciﬁ es the point “type” (i.e., analog input, control output, analog
output, etc.) and displays the current type in textual form. Because
this is a “choice” ﬁ eld, the list of available choices will be displayed
at the bottom of the screen:

CHOICES: <Anal, Cont, Anal, Trend, Logi, TUC>

To make your selection, press the

once for each

choice until the desired point type has been selected. (If you select
a point type that is different than that currently being displayed, the
screen will be rewritten with the appropriate screen and data. The
second ﬁ eld speciﬁ es the point number to edit. For the Trend Log

Screen, this number can range from one to eight. If you would like
to edit a different point, simply position the cursor to this ﬁ eld by
using the cursor positioning (arrow) keys, enter the desired point
number, and press

<Enter>

of Type:

Speciﬁ es which of the four available trend logging modes (analog
peak, analog trend, change-of-state, and run time) you wish to use.
Because this is a “choice” ﬁ eld, the list of available choices will be
displayed at the bottom of the screen:

CHOICES: <ANALOG TR, ANALOG PE, CHANGE OF, RUN TI>

Make your selection by pressing the <space bar> once for each
choice until the desired mode has been selected, and then press

<Enter>

. (When you select a trend logging mode that is different

than that currently being displayed, the screen will be rewritten
with the appropriate screen and data.)

-----------------------------------------------------------------------------------------

Satellite # 1

TREND LOGGING # 1

of Type: ANALOG TREND

Records value of: A1

RM101

Starting at: *:* on */*

once every: 1 Minute

Reset by: L16 being ON

Roll after 48 readings