WattMaster WCC II - Manual (Page 146)

Section 3: Screen Descriptions
WCC II Operator’s Guide
Operator Interfaces 3-114
If your ECC/WCC II system has a color monitor, you can use this
feature to select the screen colors for the normal display, cursor
display, highlight display, and alarm display. You can select both
the background and foreground colors.
To select another color, place the cursor over the word “color”
associated with the chosen category, and press the
<space bar> .
The color of the word “color” will change each time you press the
<space bar> . When the desired color appears, press <Enter> .
The background color is selected in the same manner. To select the
background color, press
<B> one time and then press the <space
bar> with the cursor over the word “color” in the desired category.
The color of the background will change each time you press the
<space bar> . When the desired color appears, press <Enter> . If
you want to change the foreground again, press <F> once.
SET MONITOR COLOR SCREEN
-----------------------------------------------------------------------------------------
Color Setting Screen
Normal Display color
Cursor Display color
Highlight Display color
Alarm Display color
Color setting default to Foreground
Press <B> for setting Background color
Press <F> for setting Foreground color
-----------------------------------------------------------------------------------------