Westermo RM-455U-D User Manual
Page 32
Chapter Three
Configuration
Man_455U-D Rev 3.04
Page 33
3.3.4 Serial Communications
terminal
From the Tool bar at the top of the page you can also select a basic serial communications
terminal similar to Windows Hyperterminal for basic command line interface with the
modem, e.g. will allow manual typing of Hayes AT commands.
3.3.5 Reset and Advanced mode
The Tool bar also has a Reset button that will send a Reset command to the modem
(same as the ATZ Hayes command on the Terminal)
Also the last button toggles between normal and advanced viewing modes.
This operation turns off the ability to display some of the advanced feature tabs of the
software (S Reg, Config settings, radio, modem) and some of the Broadcast settings under
Mode Settings.