ATL Telecom R1-SW Ethernet Switch - Manual (Page 122)

R1-SW24L2B User’s Manual
6-10
Field Description
RSTP Edge RSTP status of the port (enable, disable).
Trap
Whether to enable displaying trap messages of the VDSL port (enable,
disable).
LinkAgg. LACP status of the port (on, off).
Admin Speed Maximum speed of the port.
Limited Speed Limited speed of the port.
Active Speed Current speed of the port.
If Index Interface number of the port.
Logical ID Logical ID of the port.
All Total number of the incoming packets on the port.
Unicast Total number of the incoming unicast packets on the port.
Multicast Total number of the incoming multicast packets on the port.
Broadcast Total number of the incoming broadcast packets on the port.
Discard Number of the incoming packets discarded on the port.
in
Error Number of the incoming packets with errors on the port.
All Total number of the outgoing packets on the port.
Unicast Total number of the outgoing packets on the port.
Multicast Total number of the outgoing packets on the port.
Broadcast Total number of the outgoing packets on the port.
Discard Total number of the outgoing packets on the port.
out
Error Total number of the outgoing packets on the port.
runt
Number of frames received without Start of Frame Delimiter detection but
with carrier assertion.
shortCRC Number of frames less than 64 bytes in length, received with CRC error.
normalCRC
Number of frames with lengths between 64 bytes and the maximum frame
size, received with an integral number of bytes and a CRC error.
nomalAlign
Number of frames with lengths between 64 bytes and the maximum frame
size, received with a non integral number of bytes and a CRC error.
input
longCRC
Number of frames, larger then the maximum frame size, received with a CRC
error.
output eferred
Number of frames deferred at the first transmit attempt due to a busy line in
half duplex mode.