ATL Telecom R1-SW Ethernet Switch - Manual (Page 299)

Connector & Cable Specifications
B-7
Console Cable
Console cable is used to connect the console port to a console terminal (ASCII terminals or PCs
equipped with terminal emulation programs). Console cable has an
RJ-45 connector
and a
DB-9
connector
at each ends.
Note: Before connecting the console port, ensure that console terminal is configured as follows:
Baud rate Data bit Parity Stop bit Flow control
9600 8 None 1 None
Console Port DB-9 Connector
<Pin Configuration>
Console Port DB9 Connector