ATL Telecom R1-SW Ethernet Switch User Manual
Page 133
Advertising
Configuring VLAN
7-9
The following example describes how to configure the Gigabit Ethernet port
1/2
to a 802.1Q
trunk port for VLANs ‘
vlan1
’ and ‘
vlan2
’:
# configure terminal
(config)# vlan id 2 port gigabitethernet 1/2
(config)# dot1q port gigabitethernet 1/2 tag 1-2
(config)# end
# show dot1q
Port allowed 802.1q Static and Dynamic Vlans created by GVRP
-------- ------------------------------------------------------
1/2 1-2
# show dot1q port gigabitethernet 1/2
Port PVID Acceptable frame types Ingress filter
---------- ---- ---------------------- --------------
1/2 2 all off
Port allowed 802.1q Vlans
-------- ------------------------------------------------------
1/2 1-2
#
Advertising