ATL Telecom R1-SW Ethernet Switch - Manual (Page 22)

R1-SW24L2B User’s Manual
1-2
Introduction
The Corecess R1-SW24L2B is a Powerful Layer 2 Ethernet Switch that enables enhanced
functionalities at the access networks. With the help of the several features on offer by the
Corecess R1-SW24L2B commonly connected to users directly at the access network.
Since the Corecess R1-SW24L2B provides 24 auto-sensing 10/100Base-TX Fast Ethernet ports and
supports the switching speed of 8.8Gbps@full-duplex and the packet processing speed of
5.9Mpps@64bytes, the maximum wire speed assigned to each port can be guaranteed. The
Corecess R1-SWL2B can trunk the Gigabit Ethernet ports to extend uplink bandwidth using
IEEE 802.3ad LACP.
Since Gigabit Ethernet option modules can be installed in the option slot on the Corecess R1-
SW24L2B, it is easy to configure networks that can flexibly respond to a variety of
environmental needs. As it can connect to a remotely located large Gigabit Ethernet backbone
device by installing option module into the option slot of the Corecess R1-SW24L2B, it can be
used as an intermediate backbone network device of a large network as well as a mid-range
workgroup network.
The Corecess R1-SW24L2B supports high perfomance QoS (Quality of Service). Thus users can
control the various types of traffic (voice, video and other important data) easily. For example,
users can set priority of data to provide the serive without interrupt.
The Corecess R1-SW24L2B is easy to use and can be easily installed as well. Just like an Ethernet
hub, it can be used by connecting cables to the target device. And LEDs on the front panel of the
Corecess R1-SW24L2B make it easy to manage the product and networks through notifying the
operation status, port conditions and fault occurrence.