Configuration example 1, Network requirements, Configuration procedure – H3C Technologies H3C SecCenter Firewall Manager User Manual
Page 128: Adding devices to the firewall manager
122
Configuration example 1
Network requirements
The H3C SecCenter Firewall Manager works with H3C firewall devices. The Firewall Manager collects
attack events and logs sent by the firewall devices, processes and analyzes the collected data, and
presents the information to the Firewall Manager operators.
You need to ensure that there is a reachable route between the SecCenter server and each managed
H3C firewall device.
Configuration procedure
Adding devices to the firewall manager
Adding devices to H3C SecCenter is the prerequisites to other operations, such as querying device
information. This section describes how to add devices to the H3C SecCenter:
1.
Select the System Management component and then select Device List under Device Management
from the navigation tree to enter the device management page.
2.
Click Add to enter the page for adding a device, as shown in
.
Generally, you can just input the IP address and label (a string for identifying a device) of a device
and leave other fields with the default settings.