Msata boot media, Power supply modules, Codec module – Grass Valley K2 Summit 3G v.9.0 User Manual

Page 31: Msata boot media power supply modules codec module

Advertising
background image

The V: drive stores media. It also stores media file system, database, and configuration information.
K2 Summit 3G systems with direct-connect storage or shared SAN storage do not contain disk
modules, as the V: drive is on the external RAID storage devices.

When configured as RAID 1, you can remove and replace a disk module while the K2 Summit 3G
system is operational.

Related Topics

Disk module removal

on page 93

mSATA boot media

The mSATA SSD boot media contains the system drive, also known as the C: drive. The C: drive
contains application and operating system files. The mSATA media is hosted by the front interconnect
board.

Related Topics

mSATA boot media removal

on page 96

Power supply modules

The K2 Summit 3G system has redundant (two) power supplies. You should connect a power cable
to each power supply, but both power supplies remain operational if only one cable is connected.
The power supplies can be accessed from the rear of the unit. You can remove and replace a power
supply while the K2 Summit 3G system is operational. Each power supply has a fan with automatic
speed control and status LEDs that indicate current state and health. The power supply has protection
for over voltage, over current, and short circuits. The power supply modules plug into the midplane
board.

Related Topics

Power supply problems

on page 81

Power supply module removal

on page 97

Codec module

The K2 Summit 3G system has slots for two codec modules. Each codec module hosts two media
input/output channels. The codec modules are oriented horizontally across the rear of the K2 Summit
3G system chassis. They provide the majority of the K2 Summit 3G system’s media-related input
and output connectors on the rear panel. The codec modules plug into the midplane board.

A codec module can host a codec option card. The codec option card provides extended functionality
to the channels hosted by the codec module.

Related Topics

Codec module removal

on page 97

14 November 2012

K2 Summit 3G Service Manual

31

Product description

Advertising