Grass Valley K2 Summit 3G v.9.0 - Manual (Page 55)

Network configuration is complete.
Checking services
Depending on storage type (standalone or shared) of the K2 Summit 3G system, various services
are turned off or on or set to different startup types. These services are automatically set by the K2
Summit 3G system software installation program and by the Status Server service whenever the K2
Summit 3G system starts up.
NOTE: Do not manually change the way services run on a K2 Summit 3G system.
If you suspect that services have been tampered with or for any reason are not set correctly, you can
check their current settings in the Windows Services Control Panel. The table below provides the
settings for the services that are critical to a correctly operating K2 Summit 3G system.
Services on a standalone storage K2 Summit 3G system
When a standalone K2 Summit 3G system with internal storage or a K2 Summit 3G system with
direct-connect storage is operating normally, in the Services control panel services appear as follows:
Comments Startup Type Status Service
— Automatic Started CvfsPM
1
Depends on Status Server service. Automatic Started Grass Valley AppService
Used to consolidate unused space
(extents) at the end of proxy clips
on an SNFS file system. Does not
apply to non-SNFS file systems. Manual Started Grass Valley Extent Manager Service
Started by Status Server service on
standalone storage models. Manual Started Grass Valley FTP Daemon
— Automatic Started Grass Valley Host File Service
Provides access to live streaming
configuration (SDP) files. Manual Started Grass Valley HTTP File Server
This is the service that provides the
functionality for a K2 capture
service. It is the service that
automatically creates the K2 clip
from the media files in the watched
folder (source directory) and puts
the K2 clip in the K2 media storage
(destination bin). Manual — Grass Valley Import Service
Not used on standalone storage K2
Summit 3G system. Automatic Started Grass Valley K2 Config
— Manual — Grass Valley MegaRaid Server
1
With SNFS version 3.5, this is the only service. Previous versions had StorNext File System service and StorNext File
System RPC Port Mapper service.
14 November 2012 K2 Summit 3G Service Manual 55
Service procedures