Grass Valley Kayenne XL Package v.7.0.4 - Manual (Page 236)

234 Kayenne XL Package — User Manual
Section 3 — Control Panel
Ram Recorder - Bout (Break Out)
Figure 171. RAM Break Out
Break out commands are used to end an endless loop or a loop before it has
reached its defined number of counts.
• OFF (no break) 
No break out command will be accepted.
• In (break at Mark In) 
After a break out command is received the loop will be left during
reverse play and will play the part of the clip before Mark In.
• Out (break at Mark Out) 
After a break out command is received the loop will be left during
forward play and will play the part of the clip After Mark Out.
• Any (break at Mark In or Out) 
The loop will be left at the next possible Mark.