Grass Valley Kayenne XL Package v.7.0.4 - Manual (Page 95)

Kayenne XL Package — User Manual 93
Source Selection
Delegation to EMEM Selection
• Pressing the EMEM button where there are bus delegation buttons
defined causes temporary delegation of rows 1 and 2 for quick EMEM
selection/recall.
• Pressing the EMEM button and then row 1 or row 2 bus delegate button
delegates the row to EMEM selection. One or both rows may be dele-
gated at the same time.
• Pressing the EMEM button and then either the row 3 or row 4 bus dele-
gation button causes BOTH rows 3 and 4 to be delegated to EMEM
selection.
• Delegated rows show the names of the EMEM on the source name dis-
play.
• The functionality differs depending on which rows are delegated.
Delegation of rows 1 and 2 to EMEM selection enable EMEM to be directly
recalled.
Delegation of rows 3 and 4 puts the system into 'transitional EMEM selection
mode' where EMEM selection and recall can be controlled in conjunction
with the transition module.
• Selection on row 3 is equivalent to selection on rows 1 or 2 as already
described.
• Selection on row 4 prepares the EMEM.
• Pressing the Cut button on the transition module causes the EMEM
to be recalled, as already described
• Pressing the Auto button on the transition module causes an effects
dissolve to the EMEM register at the auto transition rate.
• Moving the lever arm on the transition module causes a dissolve to
the EMEM with a percentage related to the lever arm position, that
is, a manual effects dissolve.
EMEMs which are parked on the first keyframe, can now be run using the
local EMEM panel.