Grass Valley Kayenne XL Package v.7.0.4 - Manual (Page 99)

Kayenne XL Package — User Manual 97
Aux Bus Control
For each set of controls:
• Pressing a button on the top row of buttons selects an aux bus (destina-
tion).
• Pressing a button on the bottom row selects a source for the aux bus
selected on the top row.
• The source name display between these two buttons has four lines dis-
playing the following:
• Line 1: Aux bus number
• Line 2: Aux bus name
• Line 3: P = permanent input (if selected)
• Line 4: Sources
• The Split button acts in the same way to modify source selection as
described in
Split Key on page 94 when the eDPM is selected.
• The Far button acts in the same way to modify source selection as
described in
FAR Button Operation on page 94 when the eDPM is
selected.
• The two four-digit displays show the selected aux bus.