Setting general source options, Setting connections, Setting general source options setting connections – Grass Valley NewsEdit XT v.5.5 User Manual
Page 313: Adding video sources to newsedit
Adding Video Sources to NewsEdit
Digital News Production
311
Setting General Source Options
Setting Connections
Setting
Options
Description
Source Name
Enter a name for the source, such as Tape Deck.
Description
Enter a description for the source.
Source Type
Video Source
Select
Video Source
for all incoming sources, including audio
sources.
Clip Source
Select
Clip Source
to use an existing clip in the bin as a source.
Microphone
Select
Microphone
for any microphone sources.
1394 Source
Select
1394 Source
when connecting to a specific 1394 source if
multiple IEEE devices are present.
NOTE: Multiple 1394 sources are supported in NewsEdit LT
and SC, but not NewsEdit XT.
Source Type
Setting
Options
Description
Video Source
Video Input
Composite
S-Video
Component
Serial D1
IEEE 1394
Select the Video Input option that
corresponds to the source’s connection to
NewsEdit.
The S-Video interface requires the Analog
Breakout Box; the Serial Digital interface
(
SDI
) requires the Pro Digital/Analog
Breakout Box.
1394 Source
1394 Input
<
Device Name>
Select the 1394 device you are using.
Video Source
Microphone
Audio Input
Balanced Analog
Unbalanced Analog
AES/EBU
SDI/Embedded
TDIFF
IEEE 1394
Select the Audio Input option that
corresponds to the source’s connection to
NewsEdit.
The
AES/EBU
and
SDI/Embedded
options
require the Pro Digital/Analog Breakout Box.
Video Source
1394 Source
Deck Protocol
No remote deck
controls
Sony 422 Protocol
Sony DNW-A100
DV 1394
Select the Deck Protocol that corresponds to
the type of tape deck control you are using
with NewsEdit.
If you are adding a clip source, video router,
or a non-video source, select
No remote deck
controls
.