Grass Valley Profile Mix Effects Upgrad 100 Fibre Channel - Manual (Page 59)

Reinstalling Internal Cables
PDR 100 Fibre Channel Installation 59
Reinstalling Internal Cables
Figure 19 shows installation of the SCSI cable connectors. Refer to Figure 19 and:
1. Connect the cable labelled SCSI A (
Ê
in Figure 19) to the header connector
on the Master EDR board.
2. For a 4-channel PDR100, connect the cable labelled SCSI B (
Ë
in
Figure 19) to the header connector on the Slave EDR.
3. From your diagram, reconnect all other previously removed internal cables.
Figure 19. SCSI Cable Connections
9674-17
1
2