Grass Valley Profile Mix Effects Upgrad 100 Fibre Channel - Manual (Page 70)

PDR 100 Fibre Channel Installation
70 PDR 100 Fibre Channel Installation
Replacing the Profile Covers
See Figure 30 and replace covers as follows:
1. Set board area cover
Ê in place and use the Torx tool with the T10 bit to
replace the twelve cover screws; eight on top and four from the side.
2. Set disk drive cover
Ë
in place and use the Torx tool with the T10 and T15
tips to replace the cover with the screws previously removed.
NOTE: Your PDR 100 may have more disk drive cover screws than shown in
Figure 30.
Figure 30. Profile Cover Replacements
1
2
9674-12