Grass Valley PDR 200 Service Manual - Manual (Page 159)

Local Area Network (LAN) Board Connectors
PDR 200 Installation Manual A-3
Local Area Network (LAN) Board Connectors
The LAN board has two connectors for 10/100 BaseT format. The connector used
with the Profile is the 8-pin RJ-45 snap-in telephone-type connector which supports
Category 5 unshielded twisted pairs. Figure A-2 shows the RJ-45 connector and Table
A-3 lists the pin-outs.
Figure A-2. LAN RJ-45 Connector
Table A-4 lists the pin-outs for the LAN board 9-pin DIN connector.
Table A-3. RJ-45 Connector Pin-outs
Pin # Signal Pin # Signal
1 Transmit + 5 not used
2 Transmit - 6 Receive -
3 Receive + 7 not used
4 not used 8 not used
Table A-4. LAN 9-Pin Connector Pin-outs
Pin Signal
1 Receive +
2 not used
3 not used
4 not used
5 Transmit +
6 Receive -
7 not used
8 not used
9 Transmit -
9676-18
Pin 8
Pin 1
8
7
6
5
4
3
2
1