Grass Valley PDR 200 Service Manual - Manual (Page 60)

Chapter 4 Troubleshooting
4-10 PDR 200 Service Manual
Message: Could not configure. with all items requested
VdrPanel comes up but above message appears.
VdrPanel resources (video CODECs, audio channels, Timecode recorders, etc.) are in
use by other applications.
Shut down any unnecessary applications using those resources.
Symptom: No VdrPanel.
Check of Profile.log shows log started but nothing else. Looking at Process Viewer
in PDR Debug Tools group shows no processes are running.
CMOS corrupt. Reboot holding 0/INS on the keypad down, reload CMOS (see
page 5-10) and then do a normal reboot.
Symptom: Keyboard LEDs did not flash at power up.
Check cable length, must be 12 feet maximum, replace as necessary.
Check cable and connector. If OK, replace Serial EMI board.
Symptom: NT won’t boot.
CPU bad, replace.