Grass Valley Trinix NXT v.3.3.1 - Manual (Page 108)

108 Trinix NXT — Installation and Service Manual
Section 2 — Planning Guide
SMS 7000 / Encore Control
These control systems use an Ethernet connection to the Broadlinx applica-
tion, which runs on the NR-33000 Sync/NIC/OPM board.
The system is operated in the Internal Crosspoint Bus Control mode,
during which the Broadlinx board sends commands to the Crosspoint bus.
Refer to the SMS 7000 or Encore documentation for control system plan-
ning information.