Grass Valley Trinix NXT v.3.3.1 - Manual (Page 359)

Trinix NXT — Installation and Service Manual 359
Broadlinx Software with Protected Paths Installation
From the Paths Tab
Follow these steps to access the Protected Paths page:
1. Scroll down to the bottom of the Frame page.
2. Click the Signals button as shown in the figure below. The Signals:
Monitor page will then appear.
Figure 250. The Signal Button on the Paths Page
3. Click the Paths tab ( Figure 251 ).
Figure 251. The Paths Item in the Navigation Panel
4. The Signals: Protected Paths page will then appear.