Grass Valley Trinix NXT v.3.3.1 - Manual (Page 369)

Trinix NXT — Installation and Service Manual 369
Encore Configuration
Figure 260. The Logical Matrix Configuration Screen
6. Assign one logical matrix to the primary level, assign primary logical
matrix “Element 1” to be the Segment created in
Step 3 above.
7. Assign the other logical matrix to the secondary level, assign secondary
logical matrix “Element 1” to be the Segment created in
Step 3 .
8. Using the Source Configure screen, select the desired source and enter
the logical matrix names connector numbers for the primary and
secondary levels on the selected source: