Grass Valley Trinix NXT v.3.3.1 - Manual (Page 320)

320 Trinix NXT — Installation and Service Manual
Section 6 — Broadlinx Software
Figure 236. The Broadlinx card’s LED
The time that the LEDs will “blink” can be configured using the Net-
Config option in the Configure menu of NetConfig. For more informa-
tion about the Broadlinx LEDs, see NR-33000 NIC/Sync/OPM board
on
page 406 .
Follow these steps to configure various options in Broadlinx:
1. Select the NetConfig option in the Configure menu (Configure>
NetConfig option).
Figure 237. The NetConfig Options Menu
The NetConfig option dialog will then appear.
0718277609__Broadlinx-ID-LEDs